XBR H3 light replacement

[vanson1200r]

After pulling off the dust cover off the back off the head lamp and seeing the tiny screws and spring clip.....WTF how to you get that off? I have pretty big hands and I see no way for me to get the bulbs out. Is there another way?

 

[xtremelow]

The screws hold the clip in, in turn the clip holds the bulb in. Just push the clip down and you should be able to unclamp the clip from the bulb, then just pull the bulb out.

 

[vanson1200r]

My fingers look like a pack of hotdogs but let me give it a try, thanks!

 

[vanson1200r]

Blah! The fitting that holds the clip in are hooks! Easy cheesy! Thanks xtremelow

 

[vanson1200r]

The reason I asked is because last Christmas my wife bought me a set of "Bling Lights" fog lamps for my Ford Focus SVT. They said they had "halo" rings built in but when I opened the box I saw the wireing harness was a quality peice and had the extra wires to power the "halo" rings but the lights them selves had no halo rings and only H3 bulbs. Rip off! But for some reason the installed bulbs were standard crappy bulbs and in the box were a extra set of blue color 55w lights in the (I'm guessing) 4100K range. I installed them in my bike and it's a big improvement over the stock H3's but I dont think the quality is there with the "Bling Lights" bulbs so I will pop for a set of PIAA's. The low beam in the 4000 to 8000K range and the high beam in the 2600K range so it's a Euro looking yellow. As you can tell I had nothing better to do than sit here and sip coffee this morning and write this. Oh heck it's 65F here now (San Diego) so I think I will go for a ride