• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

06 xb12s no start

Buellxb Forum

Help Support Buellxb Forum:

adrnlnjnky700

Well-known member
Joined
Jun 18, 2011
Messages
62
Last thursday night somebody backed into the bike. today was the first day that i have tried to ride it since then. it wont start. i checked all the fuses under the seat they are good. the kill switch does work. i cleaned the start switched terminals and they all look good. is there something im missing. Im about to run out there and push start it just to see.

I also tried hooking up ECMSPY but says my Com port is unavailable.

thanks for the help. let me know if there is more information needed.
 
ok, after push starting it and it firing right up and running well. i went back and looked closer at the contact for the switch. it had some tarnish on it so i cleaned it up and now she starts.

still having problems getting my throttle to return to idle. its binding up in where the cables run. anybody have this issue before?
 
Back
Top