Aux lighting question

[Alien]

2006 Buell XB12X

I just successfully installed a loud as hell stebel nautilus air horn using a relay. Now I want to add some aux lighting but I'm slightly unsure how to do it the way I want it.

How would you alter this diagram if you wanted to eliminate the toggle switch and just have the aux lights come on only when the high beam was on? (Not sure if it's a factor but I have done the dual headlight mod already).

My uneducated guess is that the green/load wire coming from 86 on the relay could be spliced into the + power to the high beam bulb and everything else in the diagram would remain as is. Am I on the right track?

 

[Alien]

Thanks for nothing!

I posted this question on other sites and what I suggested above is correct.

Now for a chance for this forum to redeem itself:

Does the Uly have relays for the headlights and if so, where are they located?

 

[pos90]

You got it. The green wire to the high beam + power wire.

 

[Jasenko9643]

Every bike is going to have relays for lights including Uly, however you do not need to know where it is.
You need an extra relay (relay in the schematic above) and a piece of wire t-tapped from the hot wire of the high-beam, plugged into 86 connector, that's it. 30 85 87 remain the same as pictured above

 

[Alien]

Yeah, I've already wired them up and they're working great.