>blinkers wont properly work why??????

[TXgold]

so i can hit the right blinkers and it works ,, then left doesnt work and makes the relay (ehhhhh wierd noise) but i just replaced the relay with new one from buellster parts ,,, could it be anything else ? the relay or what?

 

[07Bolt]

check the left blinker bulb, wiring; check the relay-port for any corrosion

 

[Kid1620]

Check your wires and make sure they are hooked up right

 

[browland]

replace blinker fluid?

 

[GAXB9R]

+1 on the fluid. It gets low from time to time. If you don't have any on hand all parts stores carry it. This is one of the more common brands.

 

[nikfleisch]

Rofl that pictures makes it believable...

 

[chevnut55]

Almoast always a ground connection.

 

[TXgold]

ok so i will check the ground ,, all the contacts are solids in the wiring ,,, tghis shit been drivin me mad !!!

 

[TXgold]

were are all the ground contacts ??? one in subframe and were else

 

[redrider]

Going from stock to led blinkers my relay made the same noise i had to install resistors.I hate doing any electrical work on my bike. But i thought someone on here said you could just change to a led compatible relay. Is this true?

 

[TXgold]

i do have led blinkers but they used to work then i installed new relay becasue after my wreck (drunk girl hit me) this is happnin drivn me mad i need to 100% legall on the road cops around here are crazy tickets for no reason

 

[chevnut55]

Pick up a voltage/electical tester and start reading voltage at the sockets back to the switch. sometimes it the only way to find a problem.