CRG Levers, ZTL2 m/c, and Speigler lines

Buellxb Forum

Help Support Buellxb Forum:

EricZ

Well-known member
Joined
Oct 28, 2011
Messages
716
FS shorty CRG brake and clutch levers with a ZTL2 master cylinder and gray Speigler brake lines with gray ano. banjos and bolts. The front line has 1 rubber grommet on the line and is 720mm with a straight 10mm banjo (000) on one end and a 45 deg (004) fitting on the other. The rear line is 590mm with two straight 10mm (000) banjos. I have two M10x1.25 and 1 M10x1.0 banjo bolts.

Both levers are in pristine condition and the clutch lever has a brand new pivot assembly installed. They are like new!!

The master cylinder has no cosmetic flaws and is also in pristine condition.

The front setup was on my 2005 XB12Scg with a ZTL2 caliper. The rear was on the same bike with an SS swingarm with the hidden Brembo caliper.

$150 plus shipping for the levers with master cylinder

$70 plus shipping for the lines with bolts

Paypal works best for me

SAM_1465.jpg


SAM_1466.jpg
 
would this fit a 2007 firebolt? and do i need to actually change the lines as well as the master cylinder? and what happened to the ztl2 caliper? i am chasing one of them too.
 
I am selling these because I went to a radial m/c with ASV levers and black Speigler lines so I'm keeping the ZTL2 caliper. I would love to say yes to fitment but you should measure yourself to verify fitment.
 
thanks for the reply. i will have a look and come back to you. grey is ok as the frame is grey. 07. i run asv's on my 09 bolt. they are a sweet lever.

just looking for a ztl2 caliper also.
 
I love my CRG levers. I just changed to ASV levers for the look. They are both very nice levers. The CRGs are a bit lighter than the ASVs but nothing I'm complaining about.
 
Do you happen to know the part number for your levers? Are they RC2? Will you sell the levers separate from the master cylinder?

Do you (or anyone) know if these will also fit a 2002 M2?
 
They are not the RC2 levers. Those are new for this year. I purchased these levers in 2006. Essentially, they are the same as the Spectrum levers but the adjuster numbers are a different style text. I don't want to sell these separately but the clutch lever is the same between XBs and the tube frames and the brake lever has a slightly different cam profile (for the ZTL master cylinder) but works great with the ZTL2 master cylinder and the tube frame master cylinders.
 
ericz... mate you are a champion. see my pm and thanks for hte extra effort here. appreciated. [up]
 

Latest posts

Back
Top