Drummer Vs D&D Exhaust ???

[lancruza]

He's a better man than me, that's for sure.

I'm not trying to take any business away from Dean. If I had $600, or whatever his price is, to spend on an exhaust, Dean's would be the one I would buy. I'm not the first one in this forum to try and build a Magnaflow exhaust for an XB and I probably won't be the last. I'm sorry you were offended by me asking a couple of questions.

 

[lancruza]

I typically only work with 304, although sometimes I do titanium. The end caps are 436, the body is 409, I called MF and asked. Not sure why they'd use different materials, but that's the answer I got. You can use what you like, 304, 321 and 347 ss won't usually rust, especially if polished. You can use 2.25" or 2.5" tubing, either will fit over the cut off outlets. Good luck on making the paint stick, I'd recommend aluminum oxide media in a blast cabinet. I use Cerakote ceramic if it's getting anything other than bare or polished.

Hey Dean, I apologize if I offended you by asking a couple of questions. I appreciate your response and guidance. Evidently I offended someone on here and that was not my intent.

 

[neilrl79]

Hey Dean, I apologize if I offended you by asking a couple of questions. I appreciate your response and guidance. Evidently I offended someone on here and that was not my intent.

To be clear, you didn't offend me, and judging by Dean's willingness to answer your questions, I may have been off base.

I do, however stand by both of my statements.

 

[d_adams]

Very carefully. You should get on the Buellxb facebook page though, this is nothing. TPS resets and partouts are commonplace there.

 

[user_deleted]

You should get on the Buellxb facebook page though, this is nothing.

LOL

 

[Silverrider]

^^^^^ :applause:

 

[Silverrider]

You should get on the Buellxb facebook page though, this is nothing.

https://www.facebook.com/groups/Buellxb/

 

[d_adams]

https://www.facebook.com/groups/Buellxb/

 

[Silverrider]

Much better thx Dean!