ebr brake ducts on xb?

[qurtrn10]

I'm just about ready to order new brakes for the xb9. I really want the ztl2 caliper and system for the front. (I'll do the rear, too but haven't decided which way to go on that just yet)

I've been looking at the ebr caliper, which appears to be the exact same caliper, just with a different label. I'd like to buy new, so I would rather support ebr than go to hd for the parts (assuming price is similar across brands).

My question is about the brake ducts on the ebr. Comparing pics of the 1190rx online to the xb, the only difference I can find is one screw right in the middle of the axle. (circled in red on the pic) Any thoughts on making this work on a xb? I don't race or anything - I just think it would be neat to try as long as it can be mounted safely.

 

[squidbuellie]

You might need the axle too...that is if it would work. I'm assuming the front axle is like the xb swingarm axle with a closed end with screw hole in it.
Someone with a 1190 will have to chim in.

 

[50dro]

You may not have the clearance for it with the XB wheel? Might want to investigate this. If it does clear, you could try using a bar end type fitting to thread into the hollow axle end.

 

[Matteson]

Overkill dude. I always laugh when I see a huge spoiler on a Neon. Jeezus.

 

[d_adams]

I agree, it's overkill for an xb. The SX model does not have the scoop and it's the exact same brake setup. The only time you might possibly need it is if you're actually racing at the pro level.

 

[qurtrn10]

Oh, I completely agree. If I was to do it, it would be on for something like the Dragon where I might worry about brake fade, but otherwise it would just be on long enough to know it could work.
I just like to tinker.

 

[d_adams]

Good pads and top of the line brake fluid will help more than anything. No less than Motul RBF600 for heat, I ran the 1125/1190 race pads on mine for several years. Got an RX now and it's pointless at street speeds. Looks different, but not really needed.

 

[oh9bolt]

Any non racers want to ditch your scoop I will take it off your hands.

 

[mrlogix]

No less than Motul RBF600 for heat

thanks, answered a future question

 

[d_adams]

^ Already has that in yours. Been running it for years.

 

[mrlogix]

[cool] Thanks

 

[Matteson]

Some of the guys on the zx forums say that fluid wasn't really a factor as much as pads were. And brake lines of course, but we don't have worry about with the Buells. Have fun with whatever you choose to do Mr. Neon.

 

[UMDterp13]

Caliper is the same if you weren't 100% sure

 

[d_adams]

Not 100% the same, it's lighter.

 

[qurtrn10]

..., it's lighter.

Then that settles it. EBR caliper is what I'm going to look for. After Christmas I'll have to swing by the local EBR dealer and get a price.

 

[Cherry_Bomb]

Overkill dude. I always laugh when I see a huge spoiler on a Neon. Jeezus.

[down] I'm glad people like u troll this site when someone asks a legitimate question. Who care what this guy puts on his bike. I give the OP a thumbs up for originality and considering doing something different with his xb.

 

[oh9bolt]

^[up]

 

[MikeyLawless]

flexiglass makes a cool from fender with a built in ram air for the brake. not too pricey either: http://www.flexi-glass.com/buell.php

 

[Disturbed1]

Nice find on the Ram Air front fender MikeyLawless [up]

If there is one person obsessed about front fenders it's Mikey

 

[MikeyLawless]

haha, i ended up with one i liked. focus is now on how to mount my new headlight