G gtp3800 Well-known member Joined Jul 28, 2010 Messages 1,613 Nov 25, 2011 #61 It must have been relocated. I checked all known grounds and they are all tight.
F freak2180 Well-known member Joined Mar 24, 2010 Messages 2,748 Nov 25, 2011 #62 Now that im thinking about it all of the electronics on a lightning are under the seat.......so the grounds that we are refering to on the bolt may be located in another spot on the lightning.
Now that im thinking about it all of the electronics on a lightning are under the seat.......so the grounds that we are refering to on the bolt may be located in another spot on the lightning.
G gtp3800 Well-known member Joined Jul 28, 2010 Messages 1,613 Nov 25, 2011 #63 Yea they are and they are good. Will the Speedo not turn on if the lights aren't hooked up??
W wolfo68 Well-known member Joined Sep 14, 2010 Messages 4,402 Nov 25, 2011 #64 speedo should work fine as long as it's plugged in, check fuses?
F freak2180 Well-known member Joined Mar 24, 2010 Messages 2,748 Nov 25, 2011 #65 have you rechecked the plug in on the back of your dash? It possable its not plugged in all the way or that you bent/damaged a pin or 2.
have you rechecked the plug in on the back of your dash? It possable its not plugged in all the way or that you bent/damaged a pin or 2.
G gtp3800 Well-known member Joined Jul 28, 2010 Messages 1,613 Nov 25, 2011 #66 Yea plug looks good... Everything is where it should be
F freak2180 Well-known member Joined Mar 24, 2010 Messages 2,748 Nov 25, 2011 #67 Manual says to check your Accesory fuse is the backlighting is not working.
G gtp3800 Well-known member Joined Jul 28, 2010 Messages 1,613 Nov 25, 2011 #68 Acc fuse was blown, im going to change it now
F freak2180 Well-known member Joined Mar 24, 2010 Messages 2,748 Nov 25, 2011 #71 Well where do we stand now?
G gtp3800 Well-known member Joined Jul 28, 2010 Messages 1,613 Nov 25, 2011 #72 Yea Speedo works. Ok now these lights. I can wire it so both are always on...
G gtp3800 Well-known member Joined Jul 28, 2010 Messages 1,613 Nov 25, 2011 #73 Low is yellow to yellow. High with both on is white from s to both yellow and white on r. So how can I wire that without compromising my low lights?
Low is yellow to yellow. High with both on is white from s to both yellow and white on r. So how can I wire that without compromising my low lights?
F freak2180 Well-known member Joined Mar 24, 2010 Messages 2,748 Nov 25, 2011 #75 do B/B, W/W, Y/O, then you should have a yellow on the main harness thats not used.
G gtp3800 Well-known member Joined Jul 28, 2010 Messages 1,613 Nov 25, 2011 #76 For now im going to wire it for both always on.
G gtp3800 Well-known member Joined Jul 28, 2010 Messages 1,613 Nov 25, 2011 #77 No wait your right!! That set up works!
G gtp3800 Well-known member Joined Jul 28, 2010 Messages 1,613 Nov 25, 2011 #79 [up][up] yes you are, im going to assemble it and hopefully no more issues.
F freak2180 Well-known member Joined Mar 24, 2010 Messages 2,748 Nov 25, 2011 #80 So what are your plans for the Lightning front end?
