Having a random misfire problem....

[xxrissy_beansxx]

Sorry for reference I changed the CPS Saturday.

 

[rchuff]

When you did a tps reset did you do your afv reset to? Do you have the stock maps on it or the race maps?

 

[xxrissy_beansxx]

Stock maps and no I didn't reset my afv it was at 100% so I left it alone.

 

[xxrissy_beansxx]

I have noticed on real short test ride its taking a lot longer to return to idle. Does that mean anything ?

 

[d_adams]

Definitely a worthwhile trip to the dyno again for me.

Excessively rich, once it's leaned out a little more it should make even more power. Pretty respectable for a 9 anyway.

 

[rchuff]

When you do a tps reset it is good to reset your afv to 100 and bike should be at operating temp with cold start enrichment at 100 or below if not when bike gets to op temp it will run lean and buck and carry on ( like a misfire and get worse).

 

[xxrissy_beansxx]

Hey sorry I hadn't replied in awhile but it was has bin raining everyday for weeks now, so for an update I replaced the the cam sensor with no change at all it was still exactly the same. So I took it in to get looked at. Turns out there was literally nothing wrong with the bike at all except for a couple of fuses" mainly the one for the ECM was a loose and had some minor corrosion on them. And I do mean minor barely enough to be concerned about. But all the fuses where replaced and it has bin running flawlessly ever since. Go figure!! $180 dollars for the cam sensor and other misc. and 100$ trip to HD and $20 dollars worth of mini bus fuses. Just shows you how far ahead of myself I really was. Tisk tisk tisk. Man do I feel stupid.......[sad]

 

[rchuff]

Glad to hear the bike is back up and running flawless . Ride safe and enjoy the summer. [up]

 

[Negative]

[up][up][up] ya gotta remember to start off with the smallest stuff first and work out from that!... I have to remind myself of that a lot!!! ... Ended up freaking out one time right after I got my bike running again because I thought I mistuned my bike, lost a sensor somewhere, or fried my ecm when actually I had just idled it out of gas tuning it's idle from scratch (it took freaking forever because I was just starting to learn ECMspy as I went and made more than a few mistakes lol)... I never even bothered to check to see if it had any gas left or think twice about the gas light being on as it had been on ever since I put the half gallon of gas I had handy in it before I started the tuning process and started testing sensors left and right... Talk about slapping myself in the face when I finally put gas in it... Total bitchfit for nothing... Hopefully everybody gets a good laugh at my expense Hahaha....

 

[xxrissy_beansxx]

Hahaha yeah now that's funny. I got a good laugh.