Help finding some wires

[Loki]

Hey guys, before i introduce my new bike i have to do some stuff to her. One of the things is installing my alarm system. Ive done some searches but havent been able to find what im looking for. So i come to you, could you help me find....

Ignition/acc Wire: Color and where i can find it
Immobilizer relay (2 wires): color and where

and of course i know where the battery terminals are so those two are the only wires i need.

Please and thank you.

 

[kyle_dewald]

Have you looked at a manual or parts book? I'm at work now, but try looking through service manual, if I recall correctly they show the wiring diagram in there.

 

[Jobe Zeebuh]

^^^what kyle said. There is a whole wiring diagram in the Manual. Lists colors and everything. I wired hella shiat with it. If you don't have the Manual pm me and I can email it to you.

 

[Loki]

Well i have the manual but its 2 1/2 hours away from me. And i went through the manual the site gives us and still couldnt find it.

 

[dallasb]

You can download the manual straight from this site. Its only for the '03 and '05 xb's though.

 

[Loki]

O come on dallasb, i just said i went through the manual on here lol. And my new bike is a 08. Which i think has different wiring?

 

[dallasb]

Sorry man. On my phone so it takes awhile to type/load anything. It wasn't up there when I loaded the page.

 

[Loki]

lol its ok dont worry.

Shes sitting in my living room ready to be finished so i can show her off to you guys! I just need the wires :\

 

[kyle_dewald]

Did you check out Buellmods aka mods.buellxb.com?

 

[J_Undisputed]

I went through the same thing when trying to install the Scorpio on my bike. trying to find a place to patch the anti hijack/immobilizer module into was rather confusing. The wiring diagrams made me feel like I was taking the SAT's all over again.

From what I think I figured out... on my 06 bolt... With my alarm under the seat, the one within range that seemed to be the easiest to reach is the gray wire on the ignition coil-- the supplied wires didn't reach the front of my bike.) I still haven't patched that part in yet... rather have someone who knows for sure how to do it.... If want to take a shot at it...

Scorpio's suggest these places for their engine control wire to be patched into the ignition circuit. Next to each is what wire I think I have narrowed it down to. Keep in mind these haven't been tested/ proven.

1. Positive lead wire on fuel pump - Gray wire.
2. Positive Lead wire on Fuel Injection system-Gray wire.
3. Positive Wire that goes to the ignition fuse in the fuse box. Either a 10 or 15 amp fuse labeled IGN. (Scorpion lists this one as working on Carbureted Bikes only) - Red/Gray wire
4. Ground wire from Ignition Module- Black Wire
5. Positive wire from ignition module to ignition coil - 2nd wire on coil connector, Gray I think.

I highlighted the circuit in my manual. I'll try to scan it

 

[Loki]

Thank you J that would be great

 

[Jobe Zeebuh]

I have an '03. Sorry man.

 

[Loki]

I think i got it guys, ill inform you tomorrow. Thanks everyone! Still down for more help though.

 

[Loki]

I got it wired up and it works. Still not 100% if its wired 100% correctly but the tilt and shock sensor work and thats all i really need. I will be taking pictures and introducing you guys to the red demon (or red devil havent decided yet).