HELPP PLEASE!!!?? Squeaking rattle sound!

[bigblast7]

Oh crap! can anyone help me out? So heres the deal, a few days ago I noticed a little rattling sound coming from the right side around the right driver footpeg or around the exhaust. Stupidly, I ignored it for a day or two. I've came across some posts before on this forum and others that say something about a box of rocks sound meaning that your primary is too loose. But I dont know how exactly to reach it. But I assumed this was the problem. Now! Its making a whole different sound. Like a squeak Squeak sound while I idle at lights. It's pretty darn loud too. It's only while I idle and sometimes when I'm cruising at low speeds (5-28mph). I'm not sure what the heck it is now or if it's still the same problem I thought it was from the beginning.

Oh, also. I do feel a loss of power top and low end about a 15% decrease overall

It's getting worse by the minute and every morning I have to ride 20 miles to school and back!

anyone's immediate advise is oh so greatly appreciated!

I'll even work in the dark tonight to fix this darn problem if I can[sad]

 

[ridendude]

What do you ride?[confused]

 

[bigblast7]

oh sorry! Blast 05 stock, except for V&H exhaust

 

[ezblast]

Your primary is too tight! You must have adjusted it according to the incorrect manual setting - go about 12 more flats out.
EZ

 

[bigblast7]

Assistance! =]

 

[bigblast7]

I've never adjusted it to begin with. So now, should I?

 

[ezblast]

Ahhh - Try loosening it the 12 flats first, if still sounds then I suspect busted chain guide adjuster shoe, its into the primary for you!
EZ

 

[bigblast7]

WOOOOW, okay so first off. I'm a flippin retard. I unscrewed to the point of oil gushing.

But thanks to my tiger reflexes I quickly plugged the screw back after some mild oil drainage

Okay, so
I still have that stock ring around it and I tried to get it off with some pliers but had no such luck. Besides that, I think I tightened it to perfection. But who knows. Also the squeek/chirps are coming from the right side, just behind and below the airbox (where the belt meets with the engine) you said something about adjuster screw. Would that make A chirp sound? I'm going to have my friend who goes to MMI take a look at it tomorrow and tell your suggestions. Thanks man much appreciated

 

[TooFst]

My xb12s just started squeeking from the same area. LOUD. Kinda comes and goes. How many miles on your bike? I don't know what mine is. I do know the primary is definetly not too tight. I thought I heard a little scraping noise along w/ the squeeks and I'm just hoping it's not the main bearing.

 

[bigblast7]

about 9.8 -9.9K, exactly dude. mines the same way. I'm hopefully as well about to do an oil change asap. not sure if it well help anything relating to the problem but it's needed anyway.

 

[IYAOYAS]

Screen your oil, that will tell you alot about the condition of your motor.

 

[bigblast7]

hey, just searched around and heard from some people with pretty precisely the same chirp sound. that they took to a dealer and they said the idler pully was what was making the chirp sound!

 

[rideboarder589]

mine's making the same chirping sound...i thought it was the primary chain also so i tightened that..it seemed to fix it for a little while but now its back again...maybe ill take a look at the idler pully tonight

 

[bigblast7]

So tommorrow I'm taking it to the HD service dept. and ask them whatsup.

Besides that though, can you guys help me out with changing some thing out since I'm about to click 10K!!!! =) first off I want to change the oil. I've heard an seen some thing about mobil1 the guy at the HD dealer strictly said if you put that make sure you put specially for motorcycles not automobiles. But anyway, the only one I've found is mobil1 20/50. Would that be good? I live in FL so it's a wicked hot summer as of now and our winter starts in dec and it's about 45 the lowest. Also would I be able to use this with changing the tranny fluid too??? And how do I do that?? ONE LAST question I'm going to buy a spark plug too. What kind should I get and any advice on installing that?? THANKS MUCHO FELLAS

 

[Art]

My tensioner pully makes the same chirp while walking the bike around never heard it riding though. Bearing seems to be a little loose but not sure if that normal. Squirted a little wd-40 on it no more squeek. Bigblast7 wouldn't be useing regular mobil-1 couldn't tell you why. Wally world has the stuff for Motorcycles at least up here they do. I use amsoil in both holes so can't tell you much on Mobil1 and I also just got the plugs from the factory. Good luck.

 

[bigblast7]

thanks man. I'm gonna try that WD40 when I get home

 

[IYAOYAS]

Be sure you get the V-twin Mobil one. The auto stuff will break down your stator.

 

[bigblast7]

for both? the transmission as well as the engine?

 

[Stevenc150]

Yep, both engine & tranny. Use 20W50 Mobil 1 V-twin Full Synthetic.

 

[anrkizm95]

[up] on mobil 1