• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

pics up finally...as soon as i figure out how to work this!!!

Buellxb Forum

Help Support Buellxb Forum:

tasha1329

Well-known member
Joined
May 22, 2009
Messages
138
3859_20090602113924_L.jpg

3859_20090602113918_L.jpg

3859_20090602113910_L.jpg

3859_20090602113855_L.jpg

3859_20090602113641_L.jpg
 
sexy airbox delete, that's how I'm going to do it too! What's the other little filter? That's not a crankcase breather...?
 
Kinda looks like the breather filter was routed in the air box area. She must have drilled a new hole for it. I can't imagine that filter being used for the fuel run off line.

Kinda curious though.....It kinda looks like these were taken during the mod process, no nuts on top of the K&N filter cap.

Either way the Bike looks great!

A+ for lady Buellers. Like my br says "there buell-tiful"
 
Lightnings FTW!!! :D

and [up] on the header wrap, looks great! I'm going to do it now that I know it looks good against the black engine!
 
the small K&N is the two breathers re-routed under the lower air cover. I decided to put the breather higher than the valve covers so the excess oil would drain back into the valve cover instead of needing a drain.
 
p.s. there are nut on top of the K&N. I went out to Rona to find some flush mount ones. The Airbox mod is in fact done in that pic!!!
 
Back
Top