• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Tires, what are you using?

Buellxb Forum

Help Support Buellxb Forum:

I was thinking about getting a set of Pirelli Angel GT. Anyone have any experience with these? Started commuting 120 miles a day and I need a set that will give me more miles.
 
Going to give them a try. New tires means new bearings. What are the part numbers and where can I order wheel bearings for 2009 XB12SCG?
 
Going to give them a try. New tires means new bearings. What are the part numbers and where can I order wheel bearings for 2009 XB12SCG?

copy and paste from BM sean many moons ago. NOTE: fronts cross over to ducati and aprilia models so come with set of L&R seals. seals not used in XB wheel applications.

All balls part numbers:

Front 25-1351
Rear 25-1627

I bought them from member I think lunaticfringe. I don't remember for sure if that's him cause I email him now but I'm pretty sure it's lunaticfringe. His name is John.
 
copy and paste from BM sean many moons ago. NOTE: fronts cross over to ducati and aprilia models so come with set of L&R seals. seals not used in XB wheel applications.

All balls part numbers:

Front 25-1351
Rear 25-1627

I bought them from member I think lunaticfringe. I don't remember for sure if that's him cause I email him now but I'm pretty sure it's lunaticfringe. His name is John.

Thanks John, would you happen to have front and rear sets for sale?
 
^^^^ yes sir. keep them as well as EBC brake pads in stock for board members. email me @ below and will get you fixed up.

[email protected]
Thanks John for the quick shipment on the bearings. One thing on the bearings packages, the part number for 25-1267 is labeled as front and the part number 25-1351 is labeled as rear. What you copied here states the opposite.
 
I have dunlops on my car. Not bad for passenger tires, but, they don't seem very durable. I've had them for 25k and after rotating tires I have about 5-10k left. Maybe I'll try dunlops next season
 
On my second rear Michelin pilot 3 and it is still wearing square in the middle and feathering on the sides
Michelin pilot power 3's -- on the rear tire same thing happened to mine around 5k

I have that issue with every tire, when you live in a state with 2 curves and are throttle happy that center wears quick. 5700 miles showing cords on angel st. 6100 bald in the center on scorpion sync. I've considered trying a michelin sport touring tire, but other than life span, im pretty happy with the pirelli angel st.
 
Very very well. Heated up quick, ran 32 up front and 28 out back. Markbuilt dialed in the new gsxr front-end and the bike got faster all day. Tires stuck really well and wore really well. Couldn't be happier. We even had a bit of mist and stayed on the same pace w zero slippage.
 
Last edited:
I currently have Pilot road 2's and I really do not like them. I have always been a Pirelli Diablo guy and I will also say I loved the Pirelli Scorpion Syncs on my CityX
 
The Pilot "Road" series is supposed to be a harder durometer rubber for long milage but obviously less traction. Curious to know specifically what you don't like?
 
You summed it up in your reply. The Pirelli's are a softer compound that inspire confidence while turning. I can feel the difference in the grip of the Road series. The harder more long mileage tire, just doesn't have the same feel in turns. Ive actually slid them a couple of times which freaked me out.
I need a dual compound or full race tire at this point and if I have to replace them every year, so be it. That's what I'm used to. And being on a Buell, I want to own the corners.

Does that make sense?
 
Ya, Time to get sticky tires!:) I haven't even had luck with the 'dual compound' ones. They've been promising the best of both worlds for decades now.
{soapbox}
I firmly believe that good sticky tires on a performance bike are mandatory equipment like a helmet is.
Whats the point of buying tires with less traction (higher mileage) than stock? IMO It limits the bike and yourself, and can even make it dangerous. You expect a certain amount of control and traction then WHOOPS! ....I have tires with lots of tread on a scraped up bike....
{/soapbox}

The threads I read show people will readily spend four times what they need to per quart for oil, but complain the best tires are expensive?? I just paid $220 for a pair of Pilot power 3's sent to my door. Thats not bad to have a set of super performance tires and the confidence and security that they give me. I might get 3000 miles on a set, for me that about 3 sets a year (and I always replace them in pairs). Overkill? Every time I try to drag a knee and don't slip off a cliff its worth it:black_eyed:

You said it Lusiphur. "Own the corners":up::up::)
 
It's kind of a weird situation, I sold my Buell, when I went through 4 hip surgeries. The last 2 being full replacements.
While my bike was owned by a different person, he converted the rear to a Lightning setup and installed these tires. I actually thought I was done riding, but turns out, I was able to get back in the saddle and luckily enough, I was able to buy back my original Buell. I love the lightning rear as I had a CityX before the Firebolt. So I inherited these tires and since they had plenty of tread on them, I was trying to adjust, but they just don't inspire confidence in me, and that is not a good thing on 2 wheels especially, as you said, it's at most $300 to buy and mount great tires.
 
Back
Top