tokinbuller
Well-known member
- Joined
- Aug 23, 2017
- Messages
- 110
Your idle region looks fine though. Its not super rich or anything.
XB12S stalls only at idle, runs great
- Thread starter screwy
- Start date
Help Support Buellxb Forum:
tokinbuller
Well-known member
- Joined
- Aug 23, 2017
- Messages
- 110
Take a pic of the "other maps" to see what your cold start enrichment is at.
tokinbuller
Well-known member
- Joined
- Aug 23, 2017
- Messages
- 110
What mods do you have? Hoping you have an exhaust system on there...
You could “test” your o2 by turning off “closed loop ide” to see if your idle improves.
Edit sorry I saw you posted your mods.
You could “test” your o2 by turning off “closed loop ide” to see if your idle improves.
Edit sorry I saw you posted your mods.
Last edited:
screwy
Member
- Joined
- Sep 1, 2017
- Messages
- 11
Hey! I think the problem is cured, warmed up the bike, reset the TPS again. Then let the bike cool, and started it up, no more stalling, runs great.
Hard to tell what actually was the problem, maybe just the TPS, but now it runs like a charm also, thanks guys for all the help. :eagerness:
Hard to tell what actually was the problem, maybe just the TPS, but now it runs like a charm also, thanks guys for all the help. :eagerness:
screwy
Member
- Joined
- Sep 1, 2017
- Messages
- 11
Nop, i changed to new plugs, and the problem got worse. Put back in the old ones. Maybe there was a bad connection at the coil somewhere, hard to tell. Took the bike out for a ride, and it runs noticeably better. And no more backfire in the exhaust on decel. Got the new O2 sensor, don't know if need to change it now.
