Brembo rear "hidden" caliper mod, list of calipers

[snrusnak]

My braking power was same as stock, honestly, maybe a hair better even. Yours probably was worse due to the leak I'd guess...

 

[Dellinger]

Finally ordered my black p32f Brembo rear brake NIB for $109 shipped. Will be able to flip the old brake line. As long as the caliper comes with the banjo bolt I'm all good. Will update.

This mod will be had for under $200 total. Not bad. I think the OEM rear break is ugly so if I get equal to slightly better proformance I'm good...

 

[Dellinger]

Ok, so this is the one I ordered. It's not the right one. I contacted them and said it is the one they offer. I'm returning it.
http://motowheels.com/i-7935642-brembo-rear-caliper-p32f-32mm-piston.html
It has the fittings on the opposit side than pictured. The line would connect on the bottom when mounted requiring a new line. This defeats the prepous of this caliper over the P34. I ordered a differant one from some ware else. I contacted them before ordering, they assured me it is exactly as pictured...

I'll let the forum know if it's the correct one for anyone who wants this mod.

 

[onerun]

Hey guys.... did it as well and it's crap! The caliper leaked and had to send it all back. The price was just under 300.00 and I had to pay 103.00 to send it back. Wast of money. Wish I would have spent it on a wave disk for the rear. My 2 sents.... stay away from the guy I got it from

 

[snrusnak]

onerun, who did you order it from? And where was it leaking? Why not fix the leak?

 

[onerun]

Faddybike..... the brack it was good. Just the cheapest calaper I have ever seen. It was coming from the piston around the rubber. It's really to bad. I like the look of the mood. Just used the wrong place to get the parts maybe. Stay away. He probably will send you my old one. I didn't even get all the parts for it. There was washers missing from the pin that holds the pads.

 

[onerun]

I didn't think it was right paying 300 bucks for something that clearing was a P.O.S.

 

[Dellinger]

Sorry, Im the guy who posted the link. I was happy to see someone offering the kit, had no idea of the quality. I bought all the parts for $200. ASB bracket and the P32 caliper. Waiting on the replacement caliper. I got one of the Braking Wave disks off amazon for $107 shipped.
https://www.amazon.com/gp/product/B0031BSLJ2/ref=ox_sc_act_image_1?ie=UTF8&psc=1&smid=A16FDLXZT0LPG
Don't go by the picture. It's the correct one. I have it installed on my bike.

 

[onerun]

Yeah after exchange rate. Our dollar isn't doing so good. I think we are .74 cents to the U.S dollar. That's a good price! Right now I'm in the middle of trying to find out why my front cylinder won't fire. Changed the plugs, tested the coil park and got a 1 ohm reading and I think it should be .5 ohms so I ordered a new coil pack and wires hope that's the problem... I'm also doing the oil catch can mood . Just looking around at others and looking on ebay for the right catch can... you got any ideas links for a nice catch can? No worries. So you didn't use the guy I did??

 

[Dellinger]

Looks like the catch cans are all going away. Drummer made s nice one but it's not on their site anymore. ASB made one but they are shut down. Sent a message on FB about one, waiting to see if I get a response. I don't know...

 

[Dellinger]

The P32 caliper I got is the correct one.
http://www.gothamcycles.com/ducati-...-inlet-and-bleed-black-748998-monster-ss.html

In all reality, with the level of PITA installation. I would go with the P34 and a new brake line. The stock line works but not perfectly. The bleader valve is nearly impossible to tighten when installed. I think ASB did what they did for good reason.

 

[Buell77]

So will any P32 Brembro caliper work for this?

 

[doisreais]

Why be this model?

https://pt.aliexpress.com/item/Moto..._6&btsid=459a60a4-bbe1-442b-891a-b47306d55e2b

 

[Peter72]

Thanks for the mod ideas.