buell factory right side scoop

[user_deleted]

Hi guys, From Australia here and would love to get hold of a large right side scoop for my XB12.

I don't suppose any of you guys would be so kind as to order one of the right side sccops for me and send to Australia?

I am prepared to pay additional on top of cost of parts and postage.

The surdyke dealer and a couple of others will not post to Australia.

As far as finding a dealer here in OZ, they are useless and expensive.

Please message me if you are interested in helping me out.

Thanks guys

gav: look at the response from another aussie. if that doesn't work out for you then send me a PM and i will be happy to order up the right side scoop set-up and ship over to you. do add this item you will need the outer scoop, the inner scoop, the 3 attachment screws. i ship to OZ most every day so not a difficult task on my end. regards, john

 

[aussiegav]

Thanks guys very much appreciated. Thats why I love these forums. Cheers

Will let you know how I go.

 

[onerun]

Does anyone have any up to date information or pictures of the right hand scoop mood?? I got an 07 xb12r and really want to do the scoop and oil catch can mood.

 

[BambamXB12r]

http://m.ebay.com/itm/New-Buell-Rig...1-7AA-M0852-7AA-L19C-/282102797678?nav=SEARCH

Catch can: http://www.buellxb.com/forum/showthread.php?40487-HOW-TO-BREATHER-REROUTE-CATCH-CAN
This will give you an idea of what you need and don't forget to READ POST #12.

 

[oh9bolt]

If you put in those 2 part numbets in at surdyke.com the rss is $45. You can get the three bolts at Home Depot, etc. Just a FYI

M0851.7AA
M0852.7AA

 

[BambamXB12r]

^^^ even better, all I did was a quick Google search and that was one of the first things to come up.

 

[oh9bolt]

:up::up:

 

[user_deleted]

what jesse said. if you want to go factory....and they are shiny stainless allen head bolts....factory screw part # is:
AN1005.3FSS quantity required is 3.
IMO catch-can gizmo waste of time and space.

 

[rchuff]

I have a 07 xb12r to and did not waste my time with a catch can . Just vented behind left foot peg in the plastic holder.

 

[redwoodGardenbridges]

nice looking bike ! Does the air scoop really help the rear cylinder ?? my 06 uly only has the LH side will this one fit my bike ? thanks

 

[Chicknstripn]

I used a black 5hour energy bottle.
I drilled two small holes at the neck so it can vent. I kept the cap on it and drilled a hole through the cap the same size as the OD of the hose I used to reroute the breathers. The hose goes about an inch and a half into the bottle. I cut the hose on an angle at the end to insure it never bottoms out and causes a blockage.
Works like a charm.
I'll take a pic of it if you really need that.
Personally I like seeing what's coming out of those breathers. Everytime I empty that little can I get a small glimps as to what's going on with my engine.
Or at least that's what I tell myself.

 

[user_deleted]

nice looking bike ! Does the air scoop really help the rear cylinder ?? my 06 uly only has the LH side will this one fit my bike ? thanks

yes and yes. read the posts and provided info

 

[TheycallmeSpaz]

Hate to bring this thread back from the dead.... but I can't find an RSS...

Buellster Parts says out-of-stock

[

 

[Cooter]

For new parts go to Surdyke Harley or Newcastle Harley.

Heres one on eBay
http://www.ebay.com/itm/M0851-7AA-M...ash=item3d388a0a27:g:k4AAAMXQVERSzv3~&vxp=mtr

Heres one on eBay with the comfort kit heat shield
http://www.ebay.com/itm/New-Buell-R...ash=item41c237896c:g:k4AAAMXQVERSzv3~&vxp=mtr

 

[El_Beardo]

FYI to anyone still looking for a right side scoop: I ordered a carbon fiber scoop from MotoComposites and it arrived without any holes for the bolts. The website shows the piece with holes pre-drilled. Also, the fitment was a little wonky but I think it can be manipulated.

 

[Cooter]

Got pics?

 

[El_Beardo]

I'll take a few when I get home. I went ahead and ordered a factory unit to save myself the headaches.

 

[Silverrider]

Here is where I has bought a few , From Lance , great guy.
St Paul Harley Davidson/Buell

http://www.ebay.com/itm/M0851-7AA-M...491733?hash=item5b3a800295:g:k4AAAMXQVERSzv3~

http://www.ebay.com/itm/M1907-1AK-B...549803?hash=item5b3a9027ab:g:U2UAAOSwa39UyTr6

 

[Cooter]

I'm interested in the CF one, if you're not going to use it Maybe a trade is in order?

 

[Subarubrat]

I have the CF L + R ones and cooling has been excellent. I *think* I recall reading in the Fuell magazine (the old Buell brand mag) that the left and right were different for a reason but I don't recall what model it was discussing. Anyway, the big CF ones on both sides have worked great for me.