-
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
Buell XB12Rsc e85
- Thread starter mrNICEGUY
- Start date
Help Support Buellxb Forum:
Huh!
I've spending last few days sorting my two problems out.
At first I couldn't get connection with ECMspy, and when I did it lost immediately. Somehow I decided to unplug my MAP-sensor because that was near the only thing I had done some modifications on wirings. And ta-daa... I had connection! I had placed the MAP ground on some weird pin on ECM, cant really understand why.. I do not remember beeing drunk.
Second problem was that when I switched to KEY ON and RUN, the fuell pump started to prime and wouldn't stop until I've switched it to a OFF. I had placed the fuel warning light's ground on fuel pump's bracket so fuel pump was on the ground...
Wating for last parts from machinist, and then I can (try to) starting it... Should get it today.
I've spending last few days sorting my two problems out.
At first I couldn't get connection with ECMspy, and when I did it lost immediately. Somehow I decided to unplug my MAP-sensor because that was near the only thing I had done some modifications on wirings. And ta-daa... I had connection! I had placed the MAP ground on some weird pin on ECM, cant really understand why.. I do not remember beeing drunk.
Second problem was that when I switched to KEY ON and RUN, the fuell pump started to prime and wouldn't stop until I've switched it to a OFF. I had placed the fuel warning light's ground on fuel pump's bracket so fuel pump was on the ground...
Wating for last parts from machinist, and then I can (try to) starting it... Should get it today.
RossLH yes, i'l have to fabricate some sort of guard on it. I actually drove it and it wasn't that bad for the knee. It took a while that I dared to get near of it when it was running. It sounded a lot different live, that on the video. One of our neighbour came with hes little boy to ask if they could watch, and another one came to whine about the noise...
onelogue
Well-known member
That sounds so bad ass!!!!!
Major props, all the respect i can give because honestly i doubted this thread in the beginning and now I'm a believer
I'd like to see a tutorial video of everything you've done. Like explaining how everything works.
[up][up]
Major props, all the respect i can give because honestly i doubted this thread in the beginning and now I'm a believer
I'd like to see a tutorial video of everything you've done. Like explaining how everything works.
[up][up]
DrogeN Omen
Well-known member
more more more....!!!!!!
need more video....
can you do one while riding it... that sound is orgasmic...
need more video....
can you do one while riding it... that sound is orgasmic...
I need atleast one bottle of Koskenkorva (Finnish vodka) before considering any video where I should speak anything but Finnish! But I'l haveto write something someday when I have more time. I'l haveto take a better look on that boost leak tomorrow, I should get almost twice as much boost with this setup. I hope it's not leaking on throttle body..
Yeah!
They were concerned about the belt and pulley, so i've haveto make some guard on it. And that small oil leak.... Damn rocker box cover seal! Its leaking on the fan and when it starts it fucks everything up on oil! Literally SHIT HITS THE FAN!
They were concerned about the belt and pulley, so i've haveto make some guard on it. And that small oil leak.... Damn rocker box cover seal! Its leaking on the fan and when it starts it fucks everything up on oil! Literally SHIT HITS THE FAN!
08herobolt
Well-known member
That sucks about the oil and fan. The build looks awesome. Just take someone else's plates.
Similar threads
