• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

ECM Spy

Buellxb Forum

Help Support Buellxb Forum:

Downloaded ECMspy. I have a 09 XB9SX and should have a Voodoo-ish pipe later next week. Where do I go from here for tuning? I have NEVER played with a fuel map before and am very sketchy about doing it myself.
 
Pockets,
I can email you the tuning guide if you don't already have it. Just remember to back up your existing settings first. That way if you mess something up, you can change everything back to stock. The tuning guide walks you thru this.

Send the request to [email protected] I'll reply with the tuning guide attached.

Chad
 
I have a 09 XB9SX and should have a Voodoo-ish pipe later next week.
Pockets: ECMSpy is for the '07-Older ECM's, it won't work on your '09.

If you're just installing the exhuast can, you can probably Reset the TPS and get by until the next ECMSpy-ish program for '08-up bikes come out. Or you could contact JTS Performance and inquire about a tuning "package".

Edit: There's also Ohio Sportbike for '08+ Tuning.
 
Thanks guys for all the awesome help, love this forum.

Also Stealthy, 45$ is the best price I have found for the cable and maps. The one I ordered (EBAY) had messed up maps that came with it...long story short if I had to do it again I would get mine from a member here.
 
Stevenc150- thanks for the heads up! I did the tps reset and it actually helped my stock setup. Doesn't bog as much. Hope it works well enough again after doing the pipe. I'm looking forward to the new ECM deal that's being worked up.
 
Hi can some one send me as well esmspy program please was looking every where with out luck
Buell XB12X 2008 model
Thank you very much
 
Anyone know what the best maps are to put in a bike with a k and n and a stock pipe. I'm not into the louder aftermarket exhaust id like to keep the stock one but still wanted to see if a can get a little more out of the bike with the ecm
 
Emailed stock & race maps to you Buelltech. Without adding on an exhuast mod with the K&N, I'm not sure which would be best. If possible, I'd check the air/fuel ratio - if it's lean use the Race map.
 
Does anyone know if the new ECMspy software is out for the '09 XB12's yet? Would also appreciate if you can direct me to a site so I can download it.

Thanks all!
 
I just bought the ECM spy program and cable set off of ebay and waiting for it to come in. According to the seller there are maps there for xb9's and xb12's up to 08. I hope he's right and cant wait for it to come in.
 
Anyone have a map for an 04 xb12r who's done open airbox and modded exhaust? My ECM has been modified but it's choppy, I'd like to see if I can start from someone else's.
 
I have an 07xb12r with a K&N, airbox delete, and a D&D exhaust...Almost doen with the cable, I could send the map to you when I am finished, but with school and weather I won't be done til mid march.
 
Keep me posted Rwubbens, I'd like to see what you come up with. (assuming the year difference wont play an impact)
 
Back
Top