Tunerpro RT hooked directly to the bike!!!

[theoctopus]

I'll give you a ring.

 

[xxspudxx]

Ok. 2009 XB12R

Cable, check.
TunerPro RT 5, check.
ADX DDFI3, check.

TunerPro will not connect. Tried adjusting the payload and body from 125 to 145. It will see what ECM is in it, but will not connect. ECMread will connect and download just fine. ECMspy works as well.

Any input would be very helpful. Thanks in advance!

 

[xxspudxx]

Oh.

XDF, check.
Buell plug-in, check.

 

[crxtasy169]

Anyone in Orlando done this yet I would be willing to buy you lunch some afternoon if you could show me how this works and where to get all the downloads!
I A 2009 XB12sS.

 

[dallasb]

How do you burn a modified map using tunerpro v5.00.7

 

[xxspudxx]

Anyone have any tips on how to get it to connect?

 

[dallasb]

Have you installed the plug-in?

 

[xxspudxx]

My post got buried.

Cable, check.
TunerPro RT 5, check.
ADX DDFI3, check.
XDF, check.
Buell plug-in, check.

Changed com port to 3 and 4, no work.
uninstall, reinstall drivers, no work.
uninstall everything, try again, no work.

ECM read and ECM spy connect just fine.

Tunerpro will see what ECM model I have, but will not connect. I have changed the values from 125-145.

Im stumped.

 

[hiphopper]

I had to use comport 1 to get it to work..

 

[xxspudxx]

Ill try that tonight. Any other suggestions would be very helpful.

 

[Andrew88M]

check in tunerpro and make sure the plugin is installed and working

 

[dallasb]

Has anyone figured out how to burn information to an ecm using tuner pro?

 

[brightbuell]

Im lost guys are we no longer using ecmread with our tunerpro? For 09 xb's?

 

[xxspudxx]

Ok.

Connected via com pot 1. First datalog done.

Changes made.

Im with dallas, how do we upload?

Help a brother out!

 

[dallasb]

Well you can use ecmread to burn the data (or ecmspy for the older bikes).

 

[xxspudxx]

Ok, that sounds doable.

Now to figure out how to get it to a file ecm read understands.


[mad]

 

[xxspudxx]

Seems like there was an issue on my end. ECMread works fine.
(been a long day)

Was seeing if there was a way to do it all in TunerPro or not yet.

Also, I am having the issue hiphopper is with the labels on the rows and columns. Not showing the correct data.

I tried the "LSB First" fix, but that did not change anything. Even tried getting a new one from the site. I also do not have Map 3D, only Map.

BUEZD

Thanks!

 

[hiphopper]

I’m not really sure what I´ve done, is the right way! I have not yet uploaded anything. But for the acquisition history tables I have changed the rows to 16 and columns to 19 and then the rpms. For the fuel maps I did some edit in the XDF file. Open the fuel map, select view/edit parameter XDF info in the XDF menu, hmm manual edit ??. I will set up an free dropbox folder, so just post your mail address so we can start sharing some files.

BUE1D

 

[xxspudxx]

Ok, so I need to manually edit the rows and columns.

How do I know what needs to be labeled what? These numbers do not go in order, and I can flip them around and use LSB First but can not figure out what is the correct layout so I can change the names.

 

[seatonii]

On mine I took a short data log and changed the rows and columns in the ADX info under history to make the ECM data match the values in the log I just captured. Now I have the same TP values and RPM values on both the log and the ECM data. I did this by clicking Acquisition, then Edit Definition, then click the + next to History Tables. Now go into the Front AND rear Accel Corrections and click on the rows and columns tabs at the bottom and adjust the TP values and RPMS to match the data from the Log you just captured. My ECM is an BUE2D, 09 XB12Ss. I hope this help because I know enough to be dangerous with this stuff. : )

Dwight
Nashville