ECM Spy Download

[Buellysses]

http://lmgtfy.com/?q=ECMspy+Linux+version

 

[BigRedonBlack]

so where is everyone buying there cables from?

 

[Stevenc150]

- Xoptiinside.com is a Bueller and a reliable source. $38 shipped.

- American Sportbike has them also.

- Ebay too ,but as always, at your own risk.

Edit: Added Links

 

[2tall]

Good evening all,
I'm looking for some advise on how to stop the large amount of popping I get on the overrun and de-acceleration.
I have an 09 XB12ss and fitted a Stealth exhaust and got ecmspy, tunerPro etc and managed to download my ecm. Once down loaded I adjusted the front and rear fuel maps on the lowest row, see below

By reducing the value to 10 I was advised this would stop the popping but doesn't seem to have done very much.
Anyone out there know what else I can do???

Many thanks
Martin

 

[Conan]

Hello

Help please!

Sorry!
Translator program, because I can not write in English.

I can not connect to the motorcycle ecm spy program.
Why can not it work?
Program Version:
1 http://www.sportmotor.hu/motoros_kepek/motor/?dr=41989&cmd=pic&id=638145
2 http://www.sportmotor.hu/motoros_kepek/motor/?dr=41989&cmd=pic&id=638146

Cable and the computer:
http://www.sportmotor.hu/motoros_kepek/motor/?dr=41989&cmd=pic&id=638144

Issue:
http://www.sportmotor.hu/motoros_kepek/motor/?dr=41989&cmd=pic&id=638147
http://www.sportmotor.hu/motoros_kepek/motor/?dr=41989&cmd=pic&id=638148

Please help

Thank you

Peter Hungary

 

[Conan]

I forgot

When connecting
motorcycle engine light flashes

Thank you!

 

[MotoX6]

bump, does anyone know where i can get a ecm map for a 2003 xb9r with a jardine and high flow? stock ecm by the way.

 

[Stevenc150]

Our "sister" website is called BuellMods.com. It has almost all year/model, stock & race maps available. Signup is Free and then you'll have full access to view them. - BuellMods Download Area

 

[MotoX6]

ok, i did this and would you load the whole race eeprom they have onto the ECm or just the map?

OR do i need to tweak their race eeprom before burning it onto the ecm

 

[prostreet]

So, I have an old laptop with windows 98 on it will it work with this program?

 

[Koonsboy]

I am wondering if the maps are good at the top of the main page under downloads,. I see there are custom maps, if these are good maps and I download them how do I configure them into ecmspy. Also how would I load them into the bikes ECM.

 

[Damn_Girl]

Thanks for this Buellysses! I'm sick of putting up with the dealer's sh!t when I need a reset. I don't think the bastards even did the last one but they sure were quick to charge me. Again, thanks so much. Now onward to research these cables you guys are talking about...

 

[Stevenc150]

Go to ECMSpy.com and download version 2 of the manual - it's all in there. Also there's a DIY vid on here about flashing mapping to your ECM, but I'd recommend reading the manual first to get a "feel" for the program and how it operates.

 

[99 X1]

when i try to open up ecmspy, i get an error 'tabctl32.ocx' is missing or invalid. any ideas on whats going on? windows 7 starter in a netbook if that matters.

thx

 

[robbuell]

when i try to view the remapping video on here it says private video could someone help

 

[Stevenc150]

Try this one: Copying a Race map to stock ECM.

 

[robbuell]

thanks stevenc150 that one works

 

[robbuell]

can u buy a race mapp to flash for specific mods

 

[MotoX6]

Some are free on buellmods...

 

[robbuell]

i see those but they dont specify mods need them 04 xb12s with k&n open airbox and a jardine pipe